Water Pump

January 24th, 2012 by wrenchesauto

Your cooling system is very important. It circulates coolant through the radiator and your engine to protect your car from overheating. There are five main components to the cooling system:

  • the radiator
  • the radiator cap
  • the hoses
  • the thermostat and
  • the water pump

The water pump’s like the heart of your cooling system, circulating the fluid throughout. It’s a small pump that’s driven by the engine; usually by belt, but sometimes by a chain or gear.

The water pump only operates when the engine’s running. Water pump failure is pretty routine. Some start failing at around 40,000 miles, but most fail by 100,000 miles. Consult your owners’ manual or service technician to see what’s recommended.

Since a water pump either works or it doesn’t, you need to change it when it fails. Water pumps fail in one of two ways: the bearings fail or they begin to leak. It’s possible to have a leak from a cracked water pump, but it usually leaks at the gasket where it attaches to the engine.

So how can you tell when the water pump is failing? If you can hear a low-pitched grinding sound coming from the water pump – it’s got a problem. If you can see coolant in that area, you’ve got a leak.

Some water pumps are driven off the timing belt. They might be under a plastic cover so you can’t see the water pump. Look for coolant on the driveway. If you see some, have your service center check it out.

Most timing belts need to be changed at 60,000 miles – some longer. It’s a good idea to change your water pump at the same time if it’s one of those that’s driven off the timing belt. To start with, 90% of the work’s already done with the timing belt change. And, if you don’t, and develop a leak later, you’ll have to change the belt again along with the water pump because the belt will have been contaminated by the leaking coolant.

You can replace your water pump with a brand spankin’ new one or with a rebuilt pump. Rebuilt will save you some money, but ask your technician what he thinks. Don’t feel too bad if your water pump gives out. They will all wear out eventually. Your service technician can get you back on the road and on with your life.

Share

Posted in Cooling System | No Comments »

Fuel Saving Tip: Auto Myths Around Calgary

January 17th, 2012 by wrenchesauto


  />  

With high fuel prices in Calgary Alberta comes lots of gas saving advice. Some of it, like what you hear on AutoNetTV, is really great. Some is myth. And some is just designed to prey on Calgary Alberta people desperate to save some money on gas.

Auto Myths When you get one of those e-mails that’s going around telling you how to save gas, try to think it through.

Does it really make sense? Does it defy the laws of physics?

Do some research on the internet or ask your Calgary Alberta service advisor at Wrenches Automotive.

There aren’t any magic pills you can drop in your gas tank and the government hasn’t suppressed a device you can clamp on your fuel line to make your car run on air. Not even in Calgary!

So next time you get one of those e-mails, check it out with an automotive professional. You’ll get more bang for your buck with an oil change or an engine air filter replacement.

We’re Wrenches Automotive, give us a call at 403 291 6155 for good honest advice about your car.

Share

Posted in Fuel System | No Comments »

Looking Down the Road – Headlamps

January 12th, 2012 by wrenchesauto

If you’ve ever been driving around Calgary and had a headlamp go out, you’ve probably just wanted to replace the bad bulb. If your car uses halogen headlamps, they dim over time. So if you just put in one, they won’t have the same brightness which can be distracting and will affect your field of vision.

To have your headlights inspected, visit us at Wrenches Automotive. We’re at Bay 107, 3412 27 Str. NE in Calgary, Alberta T1Y 5E2. Or give us a call at 403 291 6155

Experts in Calgary recommend replacing your halogen headlamps every year. It’s easy to remember if you do it when daylight savings time changes in the fall. That way you’ll have bright headlamps for those long Calgary winter nights.

There are other types of headlamps in addition to halogen. There are the old standard bulbs that have been around for decades. These are OK, but you can usually upgrade to halogen. They cost a little more but you can’t believe the difference. If you do a lot of night driving you might want to use a premium halogen bulb that filters out the yellow hues and give a very white light that’s a lot like daylight.

You may have noticed those bluish headlights on luxury cars. They are high intensity discharge or, HID lamps. They really light up the road. You can upgrade to HID on some vehicles. These cost quite a bit, but they’ll last for the life of your car. If you want your Calgary friends to think you have HIDs, you can get halogens with a bluish tint – no one needs to know.

Seriously, though, night driving is all about reaction time – time to stop – time to get out of the way. You can’t react to what you can’t see. You need headlamps that’ll give you a good view down the road and good peripheral vision as well. And your headlights need to be aimed correctly so you can see and also, to keep your lights from shining off into on-coming traffic.

You may have seen older vehicles with headlights that are awfully dim and maybe even yellow. That’s because the plastic headlight lenses have gotten cloudy and yellowed with age. They can be replaced, but many Calgary service centers offer a service to restore the lens that’s a lot cheaper.

You can’t drive if you can’t see. AAA reports that nine out of ten vehicles have dirty or yellowed headlamps. So run the window squeegee over your headlights when you gas up to clear the dirt and bugs. Get your lenses restored if they need it and don’t forget to replace your standard or halogen bulbs every fall.

Share

Posted in Maintenance | No Comments »

Tire Replacement

January 4th, 2012 by wrenchesauto

You know you need new tires, but you’re not sure what type. You look at a tire to get the size: 225, 50, R, 16, 92, H. All the way to the service center you keep repeating it over and over. You even say it over in your mind while waiting in line. Then you get to the counter and the manager asks what size you need. Then your mind goes blank.

Tire size can be confusing. There’s so much on the side of the tire, and it’s hard to keep straight.

Even though there’s a lot on a tire – if you know what it all means, it’s actually more helpful than confusing. Let’s start with the size number.

For example, let’s say a tire reads: 225 50 R 16 92 H. The 225 part is the width of the tire in millimeters – the width between the sidewalls of an inflated tire with no load. The 50 is the aspect ratio – the ratio of the sidewall height to the tread width. Off-road tires will have a higher number and high performance tires will have a lower number.

The R signifies it’s a radial tire. And 16 is the rim or wheel size in inches.

The 92 is the load rating index – it’s the load carrying capacity of a tire. The higher the number, the more it can safely carry. Your empty vehicle can be safe with a lower number, but you’ll need a higher rating if you routinely haul heavy loads. The next letter is the speed rating. Not all tires are speed rated. The ratings generally follow the alphabet: the further up the alphabet, the higher the speed rating – with the exception of H – it comes between U and V (don’t ask why).

There’s a lot of fine print that you probably need a magnifying glass to read. But there are a couple of other large print items of interest. One is the tread type: highway, mud and snow, all season, severe snow, etc.

And then there’re the Uniform Tire Quality Grading System markings. The first is a tread wear index. 100 is the base line – a lower number is poorer and a higher number is better. All things being equal, a tire rated 200 would wear twice as long, on a government test track, than one rated at 100. These wear grades are only valid within a manufacturer’s product line – you can’t compare with other manufacturers. And it’s important to note that a lower rating might be just what you want – a high performance, sticky tire has a softer rubber compound and won’t wear as long, but boy, will it take those corners.

The next is a traction grade. This measures the tire’s ability to stop on wet pavement in government tests. A – the best, B – intermediate, C – acceptable.

Temperature grade measures a tire’s resistance to heat build up in government tests. A, B and C – from best to acceptable.

It’s safe to go with the original equipment recommendations that came on your car. But if you want to make adjustments, you’ll now be better equipped to communicate with your tire professional.

Share

Posted in Tires and Wheels | No Comments »

Automobile Fluids For Your truck

December 30th, 2011 by wrenchesauto


  />  

If you’ve walked through the automotive fluids of an auto parts store in Calgary, you’ll know how overwhelming the sheer number of products available can be. How do you know what’s right for your vehicle?

As you know, these fluids all serve a function in making your car run as you drive around the Calgary area. Your vehicle manufacturer has specified a particular type of fluid for every system from the motor, to the cooling system, brake fluid and so on. When you realize that not every variation is applicable to your vehicle, the task becomes more manageable.

First let’s talk about why there are so many varieties. Starting with motor oil, we see that manufacturers match the properties of a particular weight or type of oil with the design needs of the engine. For example, engines with sophisticated valve trains often require a thinner weight of oil.

Some vehicles around Calgary come from the factory filled with synthetic oil and the recommendation to use it for life. The safe bet is to always use what the factory recommends. The recommendation is what’s been proven to work in function and durability tests. The recommended oil is also a factor in determining oil change interval schedules.

Calgary Alberta Auto Fluids A good quality oil has more additives that are engineered to clean and protect the engine. They cost a bit more, but are worth the extra protection. If you buy budget oil, you might want to consider shortening your oil change interval.

Sometimes fluids are developed specifically to meet the needs of a particular family of engines. An example would be coolant. Because of the different materials used to build the cooling system, the coolant has to be formulated to protect those parts, which vary from manufacturer to manufacturer, from corrosion. We’ve seen special coolant in Calgary for General Motors, Volkswagen, Chrysler and others.

The same is true of transmission fluid and brake fluid in recent years.

The really good news is that your Calgary service center has databases that tell them the recommended fluids for your vehicle. This takes all the guess work out. If you have some special needs, like a higher mileage engine or want enhanced performance, ask your service advisor for upgrades or additives that’ll meet your needs while being consistent with the manufacturer’s recommendations.

Of course, your full-service oil change will top off your fluids. But it’s a good idea to have some of everything at home in case you need to top something off yourself or to take on a trip. Ask your Calgary service advisor at Wrenches Automotive or check your owner’s manual for fluid specifications.

It’s important to know that there are national warranty laws that say that a manufacturer cannot require you to use their brand of fluid to maintain your warranty. That said, there are two things that may affect your warranty.

Using the wrong type of fluid may void the warranty. Going back to radiator coolant, the correct type protects against corrosion and the wrong type will not. So it’s important to be right.

Also some warranty protections are conditioned on taking care of scheduled preventive maintenance. Please review your warranty if you have questions.

Share

Posted in Fluids | No Comments »

Alternative Fuel Vehicles In Calgary Alberta

December 20th, 2011 by wrenchesauto

Let’s talk about alternative fuel vehicles. In their quest to reduce the use of fossil fuels and harmful exhaust emissions to our Calgary environment, automakers will have a number of alternatives for us very soon.

For instance, Flex Fuel vehicles are already available in the Calgary area. Flex Fuel vehicles can run on gasoline or on E85 fuel. E85 is a mixture of 85 percent ethanol and 15 percent gasoline. The ethanol is made from corn.

The benefits are in using less petroleum and reduced pollution. The drawbacks are that E85 gets lower fuel economy and that when gas prices are low, E85 can be more expensive than straight gasoline.

You should only use E85 if you have a Flex Fuel compatible engine. Flex Fuel vehicles have special seals and gaskets that can stand up to the high alcohol content of E85. Using E85 in a regular engine can lead to gas leaks and fires.

Diesel engines have been around the Calgary area for a long, long time. Modern diesels are very refined and fuel efficient. Diesel fuel can be made from renewable sources like vegetable oil, too. Diesel fuel from algae and sunlight is reported to be pretty close to being commercially viable.

There are also a number of natural gas vehicles on our Calgary roads. Gasoline engines are adapted to run on compressed natural gas. It’s less expensive than gasoline and burns very cleanly. You can even refill it with a special pump from your gas line at home.

Natural gas engines don’t make as much power and don’t get as good of mileage, but they cost less per mile to run. The big inconvenience is that the tank that holds the compressed natural gas takes up a lot of room; even your whole trunk! And there may not be places to refuel on a road trip from Calgary.

Plug-in electric vehicles are now available in our Calgary area. Battery technology is the limiting factor right now. Electric cars have a limited range and are really best for use close to home. As battery technology advances, electric cars will perform closer and closer to conventional power plants.

That brings us to hybrids. There are a bunch of hybrids on our Calgary roads, with more to come. Hybrid technology combines internal combustion engines with electric motors.

A mild hybrid has a regular gas or diesel engine that’s assisted by the electric motor. The electric motor can propel the vehicle by itself up to a certain speed under gentle acceleration. There are mild hybrids in full-sized pickups and SUVs. They deliver city fuel economy similar to their highway ratings.

A full hybrid will rely primarily on the electric motor for power. It’ll have a small gas or diesel engine that generates electricity for the batteries.

Another breakthrough technology is hydrogen fuel cells. Fuel cell vehicles use hydrogen to generate electricity. Several global car makers have prototypes on the road. The appeal is that the only thing that comes out of the tail pipe is water vapor. It’ll take some time to build a national infrastructure of hydrogen fueling stations before there’s widespread use.

A quick word about safety around hybrid and electric vehicles. Unlike the battery in your current family car, these carry enough voltage to kill you. Never mess around under the hood or with the batteries or electrical wiring. Your Calgary service technician at Wrenches Automotive is trained to safely disable the flow of electricity before performing maintenance or repairs on the vehicle.

Hybrids are really not do-it-yourself vehicles unless you’re specifically trained on hybrid systems.

Share

Posted in Fuel System | No Comments »

Brake Service

December 13th, 2011 by wrenchesauto

Brakes really aren’t optional equipment. And taking care of them isn’t optional either.

A regular brake inspection is on every car’s maintenance schedule. An inspection will check your brake system and let you know if there are any problems. Of course, if you’re having trouble with your brakes, get your car into a Calgary or Calgary service center right away. And watch out for these problems:

  • Low or spongy brake pedal
  • Hard brake pedal
  • A brake warning light that stays on
  • Constantly squealing or grinding brakes
  • Vibrations or clunking sounds when you apply your brakes

There are two types of brakes: disc and drum. Disc brakes have a rotor that’s attached to the axle. Calipers straddle the rotor, kind of like the brakes on a bicycle. Drum brakes are more common on back wheels. Pads, called shoes, push against the inside of the drum to slow the vehicle.

There are several things that need to be serviced on the brake system. First, the brake pads and shoes wear out with use, and become too thin to really help. If the brake pads wear away completely you can damage the rotors. The calipers can grind grooves in the rotor. Then the rotor must either be resurfaced or replaced and that can be expensive. But putting it off is dangerous because your vehicle won’t stop as quickly. Sometimes rotors warp or crack and must be replaced.

Brake fluid is also important. When the brakes are applied, the pressure in the fluid activates the brake pads or shoes. Not enough fluid, not enough pressure to brake properly. Also, water builds up in the brake fluid over time, which leads to corrosion, leaks and brake damage, and with hard use, the brakes could severely fade or even fail. You should change the brake fluid when your manufacturer recommends it.

There are different grades of brake pads. There are regular, metallic and ceramic – higher grades cost more, but give better braking performance and smoother operation. It’s OK to upgrade your brake pads. But, never use a grade that’s lower than what the manufacturer recommends.

Be sure to properly maintain your brakes because it’s a lot cheaper than paying your nearest Calgary area body shop after an accident.

Share

Posted in Brakes | No Comments »

My Dealer In Calgary Closed: What Do I Do?

December 8th, 2011 by wrenchesauto

My Dealer Closed: What Do I Do? New car dealership closings are all over the Calgary news. Nearly 800 Chrysler dealerships canceled. About 1,100 GM dealers’ contracts were not be renewed after October 2010. And record numbers are just shutting down because they aren’t selling enough cars and trucks to stay in business.

It’s estimated that some 40,000 dealership service bays could be taken out of service in the next year or so.

Of course, this is a tragedy for those who work at our local Calgary dealerships and the owners that risk losing much of their life’s work. Our Calgary communities will lose some of our best corporate citizens. Think of all the youth sports team, service clubs and Calgary community events that have been sponsored by our local new car dealers.

One question we hear a lot at Wrenches Automotive is, ‘Who will service my car?’ Calgary folks are concerned that they will not get the care and attention they need. They’re wondering where they will find trained technicians in the Calgary area. Will they be able to get quality replacement parts for their vehicles?

Fortunately, the Calgary automotive aftermarket is ready to fill the need. As one of over 200,000 independent service and repair facilities in North America, Wrenches Automotive is here to help. Wrenches Automotive has been the backbone of the automotive service and repair industry for Calgary and will continue to provide this vital role.

My Dealer Closed: What Do I Do? Wrenches Automotive has the latest diagnostic and repair equipment, access to parts and repair databases, and a commitment to the highest standards of technician training. The reality is that our independent service center in Calgary is ready to service all your vehicle’s needs – and we always have been. We don’t have to ‘step up’ to the task – we’re ready now.

Many consumers in Calgary have known this about the local Calgary independent service and repair industry and have used it for all their non-warranty work. And they have enjoyed greater convenience and have saved quite a bit of money along the way: The average independent service and repair center in Calgary costs 34 percent less than the dealership.

And of course, Wrenches Automotive has access to the very same replacement parts as your Calgary dealership as well as a selection of superior parts for greater reliability and enhanced performance. And we can source parts that may help with a tight budget as well.

So in the midst of uncertainty surrounding dealership closings, know you can turn to your local Calgary independent service center to take care of your family’s safety and to keep your vehicles performing well. You’ll save some money too. And that’s good news in these times.

Wrenches Automotive
Bay 107, 3412 27 Str. NE
Calgary, Alberta T1Y 5E2
403 291 6155

Share

Posted in Service Standards | No Comments »

Wrenches Automotive On Your Serpentine Belt

November 29th, 2011 by wrenchesauto

Today we’re going to be talking about serpentine belts for our Calgary Alberta customers. Let’s start by talking about the accessories that are driven by the serpentine belt. First is the alternator. That’s the device that makes electricity to power the vehicle and recharge the battery. Then there’s the air conditioning compressor that makes cool air for you while you’re driving around Calgary Alberta in the summer.

The power steering and power brake pumps are driven by the serpentine belt in most vehicles. Those pumps make the pressure that assists your steering and braking.

In many vehicles, the water pump is driven by the serpentine belt. The water pump is what circulates the coolant that protects your engine. In some cars around Calgary Alberta, the water pump is driven by the timing belt.

The radiator cooling fans on some vehicles are also driven by the serpentine belt. Some have separate electric motors. That’s really a lot of work for one belt.

But modern engine design has a single belt that snakes around the front of the engine and drives most if not all of these accessories. Serpentine belts do a lot of work, but they’re tough and can last for thousands of miles.

Just how long will they last? That’ll vary for each individual car in the Calgary Alberta area. Your manufacturer will have a recommendation for when it should be changed, but it could need it sooner. The good news is that a visual inspection can reveal a belt that’s getting close to failing.

Wrenches Automotive can look at the belt: if it has more than three or four cracks per inch it needs to be replaced. A deep crack that’s more than half the depth of the belt – replace. Frayed, missing pieces, a shiny glazed look? It’s out of there.

What’s involved in replacing the belt? First the old belt is removed. Then a new one is fitted around all the pulleys for the accessories and the drive. There’s a special pulley called a tensioner.

This pulley is mounted to the engine block with a spring loaded arm. Its job is to apply the correct amount of tension to the belt to keep it from getting loose and maybe slipping off. Because the spring in the tensioner pulley wears out, AutoNetTV recommends replacing them at the same time as the belt. It just makes sense.

What are the warning signs that there’s a problem with the serpentine belt? You may hear a squealing sound from under the hood when accelerating around our Calgary Alberta streets. A loose belt might give you a slow, slapping sound.

What do you do if your belt breaks? If you’ve actually had that happen on our local Calgary Alberta freeway, it can be a little scary. Often the first thing you notice is that you have no power steering or power brakes. Don’t panic – you can still steer and brake, but you’ll have to do the work. It’ll be harder to steer and you’ll need more time and effort to stop, so plan accordingly.

Your dashboard will light up will all kinds of warnings. You’ll see a warning about your cooling system if you have a water pump that’s driven by the serpentine belt. This is very critical because without your cooling system working, your engine will overheat. If you don’t stop you’ll have massive engine damage, maybe to the point that you need a new engine. Pull over as quickly as you safely can. Open your windows and turn the heater on full blast to provide a little engine cooling and pulled over as soon as possible.

The battery light will come on because the alternator isn’t working. If your car’s water pump isn’t driven by the serpentine belt, you’re not in danger of overheating so you can drive a little further if necessary. But the battery will run down to the point where the car won’t run and will just shut off. You don’t want that to happen while you’re driving in our local Calgary Alberta traffic.

Remember, this does not have to happen if you replace your serpentine belt on schedule. Ask your technician at Wrenches Automotive to check your belts and hoses from time to time so you can take care of them if they need to be replaced prematurely.

Wrenches Automotive
Bay 107, 3412 27 Str. NE
Calgary, Alberta T1Y 5E2
403 291 6155

Share

Posted in Maintenance | No Comments »

Defensive Driving In Calgary Alberta

November 24th, 2011 by wrenchesauto

There was a man in Calgary who learned that most car accidents occur within a mile of home – so he moved. (Just Kidding!)

When we think of defensive driving, we often focus on our local Alberta highway situations. The fact of the matter is we need to be just as careful close to home in Calgary, because that’s where we do most of our driving. We can’t let our familiar surroundings keep us from driving defensively.

Defensive driving begins with the proper attitude. Have in mind that you won’t let anyone take your safety away from you. You’ll be aware of your surroundings, road conditions, other vehicles and hazards. And the first person to be concerned with is you: start with your own environment.

Don’t leave without securing all occupants including children and pets. Watch for loose items that can become projectiles during evasive maneuvers.

Driving too fast or too slow increases the chance of an accident.

Never drive impaired: Alcohol is a factor in half of all fatal crashes. Never drink and drive.

Other impairments include being sleepy, angry, daydreaming or talking. If you suddenly wonder how you got where you are – you’re not paying enough attention.

Keep your windows clean and uncluttered. No fuzzy dice and stickers.

Keep your car in good shape so that it handles properly: Maintain tires, lights, brakes, suspension, wheel alignment and steering.

Always use your turn signals while driving around Calgary Alberta. Avoid other vehicles’ blind spots.

Don’t drive faster than your headlights – if you can’t stop within the distance you can see, you’re going too fast.

Avoid driving over debris in the road. Even harmless looking items can cause damage or an accident.

Keep your wheels straight when waiting to turn at an Calgary Alberta intersection. That way if you’re hit from behind, your car won’t be pushed into on-coming traffic.

My daddy always said that when you drive, you’re actually driving five cars: yours, the one in front, the one behind and the ones on either side. You can’t trust that other drivers will do the right thing, so you’ve got to be aware of what they’re doing at all times.

If you see another car driving erratically, weaving, crossing lanes, etc., stay back. Take the next right turn if you’re downtown Calgary, or take the next exit on the Alberta highway. Notify the police if you see someone driving dangerously in our Calgary community.

Never follow too close. The minimum distance is the two second rule. Pick a landmark ahead, like a tree or road marker. When the car in front of you passes it, start counting: ‘one-one-thousand, two-one-thousand’. If you pass the landmark before reaching two-one-thousand, you’re following too close.

Remember that the two second rule is the minimum – it assumes you’re alert and aware. Three seconds is safer. Move out to five seconds or more if it’s foggy or rainy.

Someone will inevitably move into your forward safety zone – just drop back and keep a safe distance.

If someone follows you too closely, just move over.

Don’t play chicken by contesting your right of way or race to beat someone to a merge. Whoever loses that contest has the potential to lose big and you don’t want any part of that. So stay alert, constantly scan around your car and arrive safely.

Wrenches Automotive
Bay 107, 3412 27 Str. NE
Calgary, Alberta T1Y 5E2
403 291 6155

Share

Posted in Steering | No Comments »

« Older Entries